- 地址：
- 安國市南陽工業區
- 郵箱：
- 415130881@qq.com
- 電話：
- 18631165157
- 傳真：
- 0312-3427286
- 手機：
- 18631165157
渣漿泵的運行與調節流量揚程
第一節裝置揚程特性曲線及 工作點
一、 裝置揚程特性曲線(或稱管路特性曲線)
在第二章式(2-4')中，裝置揚程
Hc=Hz+ P2-P1/ pg + hw
式中 Hz----出水池液面 與進水池液面的位置高差，當泵安裝確定后它是 一個定數:
P2、P1---出水面、 進水面上的壓力，當裝置確定后，P2 、P也就確定了， 也是一個
定數;
hw---進出管路 系統的總水力損失。 渣漿泵廠家
Operation of slurry pump and regulating flow head
Section I head characteristic curve and working point of the device
I. device lift characteristic curve (or pipeline characteristic curve)
In formula (2-4 ') of Chapter II, the unit lift
Hc=Hz+ P2-P1/ pg + hw
In the formula, Hz is the height difference between the liquid level of the water outlet and the liquid level of the water inlet. When the pump is installed, it is a fixed number:
P2, P1 --- the pressure on the water outlet and water inlet. When the device is determined, P2 and P are also determined
Fixed number;
HW - total hydraulic loss of inlet and outlet pipeline system Slurry pump
上一條：渣漿泵汽蝕的防止
