- 地址：
- 安國市南陽工業區
- 郵箱：
- 415130881@qq.com
- 電話：
- 18631165157
- 傳真：
- 0312-3427286
- 手機：
- 18631165157
兩臺相同性能渣漿泵但相距很遠的泵串聯工作
如圖1- 47所示.泵I和泵lI相距很遠,進行串聯工作(例如長輸管道用油泵)時裝置特性
的畫法如下:在疊加泵I和泵lI性能曲線之前,應先將泵間管路AB對泵I的影響考慮進去。如兩泵的性能曲線都是(H-Q)1，AB段管路特性為(h-Q)1,則泵I在管路AB中輸送液體到泵Il入口時的剩余能頭應是從(H-Q)1中減去各對應流量下的(h-Q)r，即(H-Q)ll線。再將泵I的性能曲線(H一Q):與(H-Q)ll兩條曲線相加，就得這兩臺相距很遠的渣漿泵串聯后工作的性能曲線(H - Q)1+日，該線與后面管路裝置的特性(h-Q)ll相交于M點，M點即為工作點。
Two slurry pumps with the same performance but far apart work in series
As shown in figure 1-47, the distance between pump I and pump Li is very long, and it is set when the series work (such as oil pump for long-distance pipeline) is carried out
The method of drawing is as follows: before superposing the performance curve of pump I and pump Li, the influence of pipeline AB between pumps on pump I should be taken into account. If the performance curve of both pumps is (H-Q) 1 and the pipeline characteristic of section AB is (H-Q) 1, the residual energy head of pump I when delivering liquid in pipeline AB to the inlet of pump IL shall be (H-Q) 1 minus (H-Q) r under corresponding flow, i.e. (H-Q) ll line. Then add the performance curve (H-Q): and (H-Q) ll of pump I, and the performance curve (H-Q) 1 + day after the two slurry pumps are connected in series, which intersects with the characteristic (H-Q) ll of the rear pipeline device at point m, and point m is the working point.
